Top 6 tank level indicators gauges you preffered to buy

The fuel tank gauge is an essential piece of equipment on the storage tank that can provide you with the information of how much fuel or gas is left in your tank, how long the remaining fuel is going to last, and when they will need to refill the tank. Basically, the fuel tank gauges provide information about when the fuel is running low. These fuel tank gauges are combined with a tank level indicator that will set off an alarm whenever the fuel in the tank is running low.

Tank level indicators are designed for both commercial diesel and domestic oil tank level gauge applications. We make sure that our tank level gauges are categorized according to their methods of identifying the tank’s content into float gauges, electronic gauges, hydrostatic gauges, and sight gauges.

By types, products are categorized as follows:

All the details about the types of products are given below:

1.M200V Tank Level Indicator Gauge:

This is the universal remote mechanical level indicator that is very suitable for any kind of tank regardless of their shapes. It has a height of almost 2000mm. This indicator is used for the measurement of all kinds of non-aggressive liquid at normal atmospheric pressure and it connects to the top of the tank by using 1 and a half bulkhead threaded fitting. It is supplied with the bulkhead fitting which the level gauge screws into its top.

It has the highest class casing of impact plastic. It is covered with transparent plastic with an adjusting screw. It has a 1 and a half male connection. Its casing dimension of 95mm diameter x 50mm. It is not suitable for drinking water and it is not WRAS approved.

2.Enduramaxx 2500 Litre Vertical Potable Water Tank:

This product is approved by DWI and WRAS. It is a 2500liter water tank that is manufactured in the United Kingdom. It is made of medium-density polyethylene and can be used for the safe storage of water for drinking purposes.

This tank follows the design of a one-piece module that makes sure long-term strength and is made from polyethylene means that the tank will not begin to rust and it is resistant to impacts. It has the maximum thickness on the base.

It has up to 2500liters or 550 gallons capacity to store water. It has 1.5 inches of BSP male outlet. It is supplied with a bye-law 30 kit. It is available in black and all of your desired colors and it comes with a warranty of 10 years.

Most commonly, this tank is used in the food industry, having a water supply for emergency purposes, in manufacturing wine, or some purposes where water is not available.

3. 1 Inch (25mm) Tank Connection Kit:

This product is used to join two or more tanks together. It is supplied with 2×1” or 25mm tank connector. It is of 1 meter of 25mm hose and 2x clips and Hosetail fitting.

This product is not suitable for drinking water and it is not approved by WRAS.

4.Televar TLM3/R Pneumatic Tank Level Gauge:

The Televar Hydrostatic contents gauge features a hand pump mechanism and does not require any power which makes it ideal for hazardous environments. This gauge shows the tank’s contents as a percentage of the total capacity of the tank and it is suitable for all the tanks from 0.9m to 3m in the height.

The gauge is supplied with 50 meters of black polyethylene connection tube, a GRP weighted nylon balance chamber with 3 meters of NBR suspension tube. The gauge is fastened to the wall via the 3 external mounting slots with screws and wall plugs.

This gauge has a dimension of 170 x 160 x 65mm. It has a high-impact plastic with wall mounting slots casing. It is covered with transparent and high-impact plastic that has an opening tab. It is connected with a 0-ring and nut that is suitable for any tube. It has the transmission mechanism of type with a precision clock mechanism. It has the internal connection of silicon tubing. It has air metering pressure protection. It has a maximum measuring distance of 50 meters.

This is not suitable for drinking water and it is not approved by WRAS.

5.Enduramaxx 720 Litre Slimline Potable Water Tank:

This product is approved by DWI and WRAS. It is a 720liter water tank that is manufactured in the United Kingdom. It is made of medium-density polyethylene and can be used for the safe storage of water for drinking purposes.

This tank follows the design of a one-piece module that makes sure long-term strength and is made from polyethylene means that the tank will not begin to rust and it is resistant to impacts. It has the maximum thickness on the base.

It has up to 720liters or 158 gallons capacity to store water. It has 1.5 inches of BSP male outlet. It is supplied with a bye-law 30 kit. It is available in black and all of your desired colors and it comes with a warranty of 10 years.

Most commonly, this tank is used in food industry, having a water supply for emergency purposes, in manufacturing wine, or some purposes where water is not available.

It has the height of almost 2150mm. It can store up to 720 liters of water. It is suitable for drinking purposes but it is not approved by WRAS.

6.15m EcoQuilt Tank Insulation Kit:

The insulation kit provides frost protection or temperature retention for the storage tank and is the highest EN certificated multi-foil insulation blanket in Europe recommended for large industrial projects.

It has consisted of 1 x 1.5m x 10m roll of multi-foil reflectors, 1 x staple gun with 2000 staples, 1x roll of 75mm x 50m Thermaseal insulation tape.

You May Also Like

Leave a Reply

Your email address will not be published. Required fields are marked *