A Water level indicator is a device that sends data to a control panel to display whether a body of water has a high or low water level. To sense water levels, some water level indicators use a combination of probe sensors and float switches. According to the Electronics Hub, the Water Level Indicator uses a basic method to find and indicate the level of water in an above tank or other containers of water.
The water level in a water tank is measured and regulated using a water level indicator. The control panel can be programmed to automatically turn on a water pump and refill the tank when the water level falls too low.
A water level indicator’s working theory is actually very plain. Sensor probes are used to show water levels in a storage tank through water level indicators. These probes send data back to the control panel, which causes an alarm to be triggered. As previously mentioned, the control panel can be programmed to turn on your pump automatically to refill the water tank.
Nothing occurs when the water level is complete.
The water level drops before it reaches the reference probe – The alarm has been set off.
The fill start button is pressed, and the water is turned on to fill the tank.
When the water tank is full, the fill stop is activated, and the pump is shut off automatically.
Application of Water level Indicator
Water level indicators can be used in hotels, pools, factories, and building fire safety systems, among other places. A water level indicator can also be used for the following purposes:
1. As a liquid level indicator in large containers
2. Motor with a single step
3. Submersibles with a single process
4. Hotels and Apartments
5. Workplaces and Complex
6. Where do cooling towers come into play?
7. In Swimming pools for both residential and industrial
8. Wherever there is a need to regulate water levels,
9. As a fuel level indicator in automobiles
Forms of Water Level Indicator
- Float switches
- Water level Gauge and controls
- Swimming pool water level indicators
- Electronic water level indicator
- Single point level indicators
- Conductivity level sensors
- Spark plug water level indicators
- PVC water level sensors
- Hanging water level sensors
- Wireless water level sensors
- Floatless level indicators
Advantages by Using a Water Level Indicator
Installation is simple.
You can save manual labour time by using automatic save.
Uses less water and power, which saves money.
There is very little upkeep.
Overflows and dry pumping are prevented by automatic water level indicators.
Can help prevent seepage through walls and roofs caused by overflowing tanks.
Shows incitation of water levels in any form of tank and consumes very little energy, making it ideal for continuous activity.
Many different industries depend on water level indicators. Water level indicators, for example, are used in cooling towers to track water levels in a tank and take corrective measures depending on the level of water. Without water level indicators in a water tank, you’d have to manually check if there’s enough water in the tank, and if it ever runs dry, your chiller could overheat. Water level indicators allow you to track water levels remotely and take corrective measures automatically, allowing you to concentrate on more pressing issues.
The use of water level control systems often reduces the need to operate the pumps at inconvenient times, such as at night. It also ensures a sufficient supply of water during peak hours, especially in the morning. Unique sensors and timers ensure that the water level is pumped to its limit before peak hours. It also keeps the water level consistent during the day. Water level control systems come in a variety of styles and can be purchased for a reasonable price from online retailers. The popularity and use of these devices have skyrocketed because they help save energy, water, and pump life. At last, If you want to learn more about the other indicators then read this article, It might be helpful.